The load capacity of plastic logistics turnover boxes can be divided into three types: dynamic load, static load, and shelf load. These three types of load capacity are usually static load>dynamic load>shelf load. When we understand the load capacity clearly, we can ensure that the purchased plastic turnover box is used to carry the load. 
1. The first is the dynamic load: in simple terms, it is the load capacity of the plastic turnover box when it is moving off the ground. This is also the most common load capacity. This data is very important for pallet users who need to transfer goods back and forth. Generally divided into four standards: 0.5T, 1T, 1.5T and 2T.
2. The second is static load: static load means that the pallet does not need to move back and forth when placed on the ground, that is, it is used in a way that rarely moves. The load capacity of this mode generally has three standards: 1T, 4T, and 6T. In this case, the service life of the turnover box is also the highest.
3. Finally, there is the shelf load. The load capacity of the shelf is generally relatively small, generally within 1.2T. The reason is that turnover boxes need to carry goods for a long time without full support. This situation has very high requirements for plastic turnover boxes, because the goods are stored on shelves off the ground. Once there is a problem with the plastic turnover boxes, The damage to the goods on the pallet is huge. Therefore, the pallets used on shelves must be purchased with high quality.
Post time: Dec-08-2023
